Free Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) Practice Questions

Sample Practice Questions

Try these 10 sample questions from the Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) practice bank. Each includes the answer and explanation. Continue with the interactive practice above to review the full question set.

1. 1Before configuring a Dell iDRAC hardware provider for a bare-metal installation in Foundation Central Appliance 2.2, which network information must an administrator have?

   1. A.The servers' BMC management addresses or address rangeCorrect answer: A
   2. B.The servers' AHV host management addresses or address range
   3. C.The Controller VM management addresses or address range
   4. D.The Prism Central virtual IP address or address range

   Explanation: The prerequisites say to "Confirm that you have the IP addresses (individual IPs or an IP range) for Dell, HPE, and Lenovo server management interfaces (BMC)." Host, CVM, and Prism Central management addresses do not identify the required BMC interfaces.

   Reference: Configuring Hardware Providers for Bare Metal Installation — Before you begin

2. 2Which NGT component maintains the communication channel between the Controller VM and guest VMs?

   1. A.Nutanix Guest Agent serviceCorrect answer: A
   2. B.Nutanix VirtIO package
   3. C.Nutanix VSS package
   4. D.NGT installer

   Explanation: The guide states, "Nutanix Guest Agent (NGA) Service: Maintains a communication channel between the Controller VM (CVM) and the guest VMs." The other components have different roles.

   Reference: Prism Central Infrastructure Guide — Nutanix Guest Tools Overview

3. 3Which description correctly compares PCBR continuous and point-in-time backup destinations in Prism Central pc.7.5?

   1. A.Continuous uses registered clusters; point-in-time uses object storageCorrect answer: A
   2. B.Continuous uses object storage; point-in-time uses registered clusters
   3. C.Both continuous and point-in-time use only object storage
   4. D.Both continuous and point-in-time use only registered clusters

   Explanation: The guide states, "Backup to registered Nutanix clusters is called continuous backup, because it happens continuously at an RPO of 30 minutes." It describes point-in-time backup to S3-compatible object storage or Nutanix Objects.

   Reference: Prism Central Infrastructure Guide — Configuring Continuous Backup

4. 4What information does NCM Capacity Runway use to predict future utilization of an existing Nutanix cluster?

   1. A.Live and historical metrics from the actual workloadsCorrect answer: A
   2. B.Only a fixed hardware inventory with no workload metrics
   3. C.Only manually entered future VM counts without historical usage
   4. D.Only the current workload snapshot with no historical data

   Explanation: The Nutanix capacity guide says Capacity Runway "uses live and historical metrics recorded from the actual workloads and machine learning to analyze usage and predict future trends." This supports planning for future cluster utilization.

   Reference: Sizing and Capacity Planning for Nutanix Cloud Infrastructure — NCM Capacity Runway

5. 5An administrator changes credentials on an existing Foundation Central Appliance 2.2 hardware provider connection and wants to run node discovery again. What action should follow the update?

   1. A.View the connection's discovered-node count
   2. B.Refresh the hardware provider connectionCorrect answer: B
   3. C.Update the hardware provider connection again
   4. D.Delete the hardware provider connection

   Explanation: The guide says, "Update to change IPs or credentials. This does not trigger discovery. Use Refresh to start discovery." Updating credentials does not itself restart discovery; Refresh does.

   Reference: Configuring Hardware Providers for Bare Metal Installation — Procedure, hardware provider connection actions

6. 6For NGT installation using the ISO, what virtual device must a VM have available?

   1. A.An empty IDE or SATA CD-ROMCorrect answer: A
   2. B.An IDE or SATA CD-ROM already occupied by another ISO
   3. C.An empty virtual SCSI CD-ROM
   4. D.An empty virtual IDE or SATA hard disk

   Explanation: The general requirements state, "VMs must have at least one empty IDE or SATA CD-ROM to attach the ISO required for the configuration and installation of NGT". The other devices or occupied media do not meet the stated prerequisite.

   Reference: Prism Central Infrastructure Guide — Nutanix Guest Tools Requirements, General Requirements

7. 7How do PCBR continuous and point-in-time backups differ in their available Prism Central restore points?

   1. A.Continuous restores the latest; point-in-time can use an available restore pointCorrect answer: A
   2. B.Continuous can use any restore point; point-in-time restores only the latest
   3. C.Both backup types can restore only the latest backup
   4. D.Both backup types can select any available restore point

   Explanation: The PCBR overview says, "You can recover the Prism Central instance only from the latest backup" for continuous backup, while point-in-time backup can recover from any available restore point.

   Reference: Prism Central Infrastructure Guide — Prism Central Backup, Restore, and Migration

8. 8An administrator wants to estimate capacity needs after adding a proposed workload before it is deployed. Which Capacity Runway feature supports that analysis?

   1. A.Model the impact of the proposed workload in a what-if scenarioCorrect answer: A
   2. B.Forecast only the unchanged current workload without the proposed addition
   3. C.Deploy the proposed workloads automatically without modeling
   4. D.Remove the existing workload history before creating the forecast

   Explanation: The capacity guide describes "What if" scenario planning as a way to "plan capacity ahead of time for new incoming requirements". The administrator can model the proposed workload before deployment.

   Reference: Sizing and Capacity Planning for Nutanix Cloud Infrastructure — NCM Capacity Runway

9. 9For Foundation Central Appliance 2.2 bare-metal installation, what must be done with the AHV and AOS images before configuring hardware providers?

   1. A.Upload only the AHV image before configuration
   2. B.Upload both images before configurationCorrect answer: B
   3. C.Upload only the AOS image before configuration
   4. D.Upload both images after configuring the provider

   Explanation: The prerequisites state, "Verify that AHV and AOS images are uploaded." Uploading the required images prepares the appliance for the bare-metal workflow; the other choices do not fulfill this prerequisite.

   Reference: Configuring Hardware Providers for Bare Metal Installation — Before you begin

10. 10How can a guest customization profile be used for Windows VMs in Prism Central pc.7.5?

    1. A.Reuse the profile during VM cloning and template deploymentsCorrect answer: A
    2. B.Use the profile only once for a single VM clone
    3. C.Use the profile only for Linux template deployments
    4. D.Use the profile only after manually configuring each new VM

    Explanation: The guide says, "Use the guest customization profile feature to define configuration settings for Windows VMs before deploying from a VM template or during VM clone operations." It describes profiles as reusable across VM deployments.

    Reference: Prism Central Infrastructure Guide — Guest Customization Profile