OpenExamsFREE PRACTICE — ANY EXAM

Maryland Lead Abatement Supervisor — Requirements & Free Practice

US-MD · License preparation

234 free questions · Answer explanations · No signup required

Choose what to practice

Start with an exam below. Your examination requirements depend on your application pathway. View licensing requirements

Combined practice

Choose an exam or combined practice to begin.

Licenses, application pathways and examination requirements

Each license and applicant pathway has its own requirements and exemptions. Choosing practice questions does not determine your eligibility.

Lead Paint Removal and Demolition Supervisor Accreditation

Authorizes oversight of removal and demolition and of maintenance and repainting in residential, commercial, and public buildings.

Licensing authority: Maryland Department of the Environment, Lead Poisoning Prevention Program · Application information

Initial accreditation by training and examination

All of the following:

Accreditation term
The category certificate and identification card expire 24 months following accreditation; timely review-course completion, passing examination and renewal application are required.
Application
Complete the Department application through LRCA, supply proof of the category qualifications, and pay the applicable fee under COMAR 26.16.01.04C and .20; the State/local-government exemptions in .20C apply.
Exam acceptance
COMAR 26.16.01.06F(4) permits the Department to accept EPA third-party examination results; acceptance is discretionary. Another state’s third-party examination results are applicant evidence, with the law and discipline portions uploaded as the MDE fact sheet directs, and are not Maryland exam leaves.
Experience
At least 2 years of experience in related construction trades, including lead paint abatement, carpentry, painting, or demolition.
Prior passing score
MDE Lead Paint Third Party Exam, page 1, states: "Once the exam is passed, it is not required to be taken again even if there is a gap in training and/or accreditation providing it is found on file." A prior pass excuses a new sitting; it does not remove the currently offered exam leaf.
Recognized training
COMAR 26.16.01.04H permits recognition of another state’s or a federal agency’s accredited course only on Department equivalency determination and adequate evidence from its training provider; acceptance and resulting training credit are applicant conditions.
Regulatory compliance
The MDE supervisor form asks the applicant to certify compliance with COMAR 26.16.01, 26.16.05 and/or 26.02.07.
Tax and child support
The MDE Supervisor Application, VI, states that before issuance or renewal the issuing authority verifies outstanding taxes, unemployment insurance contributions, and child support with the designated agencies.
Third party passing score
Attain 70 percent or greater on the applicable third-party examination; Maryland training must be current within the six-month period identified in COMAR .06F(5) and the MDE fact sheet.
Training
Complete the appropriate accredited initial course: At least 28 instructional hours over at least 4 days. Attend the entire course and participate actively in hands-on activities under COMAR 26.16.01.05F.
Worker course credit
Under COMAR 26.16.01.07B(1)(b), an individual who successfully completed the initial lead paint abatement worker course is considered to have completed the core topics and 7 hours of supervisor training.
Reaccreditation after lapsed training or accreditation

All of the following:

Accreditation term
The category certificate and identification card expire 24 months following accreditation; timely review-course completion, passing examination and renewal application are required.
Application
Complete the Department application through LRCA, supply proof of the category qualifications, and pay the applicable fee under COMAR 26.16.01.04C and .20; the State/local-government exemptions in .20C apply.
Exam acceptance
COMAR 26.16.01.06F(4) permits the Department to accept EPA third-party examination results; acceptance is discretionary. Another state’s third-party examination results are applicant evidence, with the law and discipline portions uploaded as the MDE fact sheet directs, and are not Maryland exam leaves.
Experience
At least 2 years of experience in related construction trades, including lead paint abatement, carpentry, painting, or demolition.
Lapsed training
MDE Important Training Requirements states: "If your certification has lapsed, you must retake the initial course." The supervisor form states refresher courses are valid only when taken before the relevant training or accreditation expired.
Prior passing score
MDE Lead Paint Third Party Exam, page 1, states: "Once the exam is passed, it is not required to be taken again even if there is a gap in training and/or accreditation providing it is found on file." A prior pass excuses a new sitting; it does not remove the currently offered exam leaf.
Recognized training
COMAR 26.16.01.04H permits recognition of another state’s or a federal agency’s accredited course only on Department equivalency determination and adequate evidence from its training provider; acceptance and resulting training credit are applicant conditions.
Regulatory compliance
The MDE supervisor form asks the applicant to certify compliance with COMAR 26.16.01, 26.16.05 and/or 26.02.07.
Tax and child support
The MDE Supervisor Application, VI, states that before issuance or renewal the issuing authority verifies outstanding taxes, unemployment insurance contributions, and child support with the designated agencies.
Third party passing score
Attain 70 percent or greater on the applicable third-party examination; Maryland training must be current within the six-month period identified in COMAR .06F(5) and the MDE fact sheet.
Training
Complete the appropriate accredited initial course: At least 28 instructional hours over at least 4 days. Attend the entire course and participate actively in hands-on activities under COMAR 26.16.01.05F.
Worker course credit
Under COMAR 26.16.01.07B(1)(b), an individual who successfully completed the initial lead paint abatement worker course is considered to have completed the core topics and 7 hours of supervisor training.
Accreditation using qualifying training completed before the chapter took effect

All of the following:

Accreditation term
The category certificate and identification card expire 24 months following accreditation; timely review-course completion, passing examination and renewal application are required.
Application
Complete the Department application through LRCA, supply proof of the category qualifications, and pay the applicable fee under COMAR 26.16.01.04C and .20; the State/local-government exemptions in .20C apply.
Exam acceptance
COMAR 26.16.01.06F(4) permits the Department to accept EPA third-party examination results; acceptance is discretionary. Another state’s third-party examination results are applicant evidence, with the law and discipline portions uploaded as the MDE fact sheet directs, and are not Maryland exam leaves.
Experience
At least 2 years of experience in related construction trades, including lead paint abatement, carpentry, painting, or demolition.
Pre chapter training
COMAR 26.16.01.04G permits accreditation after training completed before this chapter’s effective date when the course met the chapter requirements, the provider received Department accreditation, and the applicant meets all other accreditation requirements. The course-examination requirement is retained.
Prior passing score
MDE Lead Paint Third Party Exam, page 1, states: "Once the exam is passed, it is not required to be taken again even if there is a gap in training and/or accreditation providing it is found on file." A prior pass excuses a new sitting; it does not remove the currently offered exam leaf.
Recognized 1992 program
COMAR 26.16.01.10C(1)(c) specifically accepts pre-chapter completion of the EPA July 1992 Lead Abatement Training for Contractors and Supervisors program as satisfying training and making the applicant eligible to take the Maryland accreditation examination.
Recognized training
COMAR 26.16.01.04H permits recognition of another state’s or a federal agency’s accredited course only on Department equivalency determination and adequate evidence from its training provider; acceptance and resulting training credit are applicant conditions.
Regulatory compliance
The MDE supervisor form asks the applicant to certify compliance with COMAR 26.16.01, 26.16.05 and/or 26.02.07.
Tax and child support
The MDE Supervisor Application, VI, states that before issuance or renewal the issuing authority verifies outstanding taxes, unemployment insurance contributions, and child support with the designated agencies.
Third party passing score
Attain 70 percent or greater on the applicable third-party examination; Maryland training must be current within the six-month period identified in COMAR .06F(5) and the MDE fact sheet.
Training
Complete the appropriate accredited initial course: At least 28 instructional hours over at least 4 days. Attend the entire course and participate actively in hands-on activities under COMAR 26.16.01.05F.
Worker course credit
Under COMAR 26.16.01.07B(1)(b), an individual who successfully completed the initial lead paint abatement worker course is considered to have completed the core topics and 7 hours of supervisor training.
Recognition of another state or federal accreditation
No examination is required for this applicant pathway.
Application
Complete the Department application through LRCA, supply proof of the category qualifications, and pay the applicable fee under COMAR 26.16.01.04C and .20; the State/local-government exemptions in .20C apply.
Contractor certification
A contractor other than a self-employed individual must also supply the certification required by COMAR 26.16.01.09B.
Equivalency
The Department may recognize that accreditation only if the granting jurisdiction’s requirements equal or exceed Maryland’s; recognition is discretionary under COMAR 26.16.01.04F.
Held accreditation
Hold accreditation granted by another state or a federal agency and maintain it in good standing.
Regulatory compliance
The MDE supervisor form asks the applicant to certify compliance with COMAR 26.16.01, 26.16.05 and/or 26.02.07.
Tax and child support
The MDE Supervisor Application, VI, states that before issuance or renewal the issuing authority verifies outstanding taxes, unemployment insurance contributions, and child support with the designated agencies.

Official no-examination sources

Effective from 2026-09-22.

Renewal of accreditation before expiration

All of the following:

Accreditation term
The category certificate and identification card expire 24 months following accreditation; timely review-course completion, passing examination and renewal application are required.
Application
Complete the Department application through LRCA, supply proof of the category qualifications, and pay the applicable fee under COMAR 26.16.01.04C and .20; the State/local-government exemptions in .20C apply.
Exam acceptance
COMAR 26.16.01.06F(4) permits the Department to accept EPA third-party examination results; acceptance is discretionary. Another state’s third-party examination results are applicant evidence, with the law and discipline portions uploaded as the MDE fact sheet directs, and are not Maryland exam leaves.
Experience
At least 2 years of experience in related construction trades, including lead paint abatement, carpentry, painting, or demolition.
Prior passing score
MDE Lead Paint Third Party Exam, page 1, states: "Once the exam is passed, it is not required to be taken again even if there is a gap in training and/or accreditation providing it is found on file." A prior pass excuses a new sitting; it does not remove the currently offered exam leaf.
Regulatory compliance
The MDE supervisor form asks the applicant to certify compliance with COMAR 26.16.01, 26.16.05 and/or 26.02.07.
Tax and child support
The MDE Supervisor Application, VI, states that before issuance or renewal the issuing authority verifies outstanding taxes, unemployment insurance contributions, and child support with the designated agencies.
Third party passing score
Attain 70 percent or greater on the applicable third-party examination; Maryland training must be current within the six-month period identified in COMAR .06F(5) and the MDE fact sheet.
Training
Complete the designated review course, at least 7 instructional hours, and apply before the certificate expires.

Lead Paint Removal and Demolition Supervisor Initial Course Examination

Provider
Department-accredited training provider
Format
Course examination; COMAR allows written, oral, and practical application components.
Passing score
70 percent
Examination outline
  • Core topics — COMAR 26.16.01.05D
    • Toxic effects of lead on young children, adults, and fetuses
    • Common sources of exposure to lead
    • Routes of exposure to lead
    • Hygiene and work practices to reduce lead exposure
    • Work practices necessary to minimize lead dust concentration
    • Containment, cleanup, and disposal of lead dust and debris
    • How to select, fit test, and maintain appropriate respiratory protection equipment
    • Protection from common work site hazards
    • Regulatory standards established by the Maryland Department of the Environment, Maryland Occupational Safety and Health Act, Federal Environmental Protection Agency, and Federal Occupational Safety and Health Administration
  • Lead Paint Removal and Demolition Supervisor course topics — COMAR 26.16.01.10C
    • The core topics listed in Regulation .05 of this chapter
    • Regulations governing lead paint abatement activities and projects
    • Window replacement techniques
    • Worker safety and health requirements
    • Safe and effective lead paint abatement practices
  • Applicable supervisor curriculum — 40 CFR 745.225(d)(3), incorporated 2003 edition
    • Role and responsibilities of a supervisor
    • Background information on lead and its adverse health effects
    • Background information on Federal, State, and local regulations and guidance that pertain to lead-based paint abatement
    • Liability and insurance issues relating to lead-based paint abatement
    • Risk assessment and inspection report interpretation
    • Development and implementation of an occupant protection plan and abatement report
    • Lead-based paint hazard recognition and control
    • Lead-based paint abatement and lead-based paint hazard reduction methods, including restricted practices
    • Interior dust abatement/cleanup or lead-based paint hazard control and reduction methods
    • Soil and exterior dust abatement or lead-based paint hazard control and reduction methods
    • Clearance standards and testing
    • Cleanup and waste disposal
    • Recordkeeping
Examination sources

Lead Paint Removal and Demolition Supervisor Review Course Examination

Provider
Department-accredited training provider
Format
Course examination; COMAR allows written, oral, and practical application components.
Passing score
70 percent
Examination outline
  • Core topics — COMAR 26.16.01.05D
    • Toxic effects of lead on young children, adults, and fetuses
    • Common sources of exposure to lead
    • Routes of exposure to lead
    • Hygiene and work practices to reduce lead exposure
    • Work practices necessary to minimize lead dust concentration
    • Containment, cleanup, and disposal of lead dust and debris
    • How to select, fit test, and maintain appropriate respiratory protection equipment
    • Protection from common work site hazards
    • Regulatory standards established by the Maryland Department of the Environment, Maryland Occupational Safety and Health Act, Federal Environmental Protection Agency, and Federal Occupational Safety and Health Administration
  • Lead Paint Removal and Demolition Supervisor course topics — COMAR 26.16.01.10C
    • The core topics listed in Regulation .05 of this chapter
    • Regulations governing lead paint abatement activities and projects
    • Window replacement techniques
    • Worker safety and health requirements
    • Safe and effective lead paint abatement practices
  • Applicable supervisor curriculum — 40 CFR 745.225(d)(3), incorporated 2003 edition
    • Role and responsibilities of a supervisor
    • Background information on lead and its adverse health effects
    • Background information on Federal, State, and local regulations and guidance that pertain to lead-based paint abatement
    • Liability and insurance issues relating to lead-based paint abatement
    • Risk assessment and inspection report interpretation
    • Development and implementation of an occupant protection plan and abatement report
    • Lead-based paint hazard recognition and control
    • Lead-based paint abatement and lead-based paint hazard reduction methods, including restricted practices
    • Interior dust abatement/cleanup or lead-based paint hazard control and reduction methods
    • Soil and exterior dust abatement or lead-based paint hazard control and reduction methods
    • Clearance standards and testing
    • Cleanup and waste disposal
    • Recordkeeping
  • Review course emphasis and incorporated refresher curriculum
    • New and emerging techniques and procedures
    • Current safety practices relating to lead-based paint activities in general and the appropriate discipline
    • Current laws and regulations relating to lead-based paint activities in general and the appropriate discipline
    • Current technologies relating to lead-based paint activities in general and the appropriate discipline
Examination sources

Maryland Lead Paint Third Party Exam — Removal and Demolition Supervisor

Provider
Maryland Department of the Environment
Format
Multiple choice
Exam questions
50
Passing score
70 percent or higher
Exam fee
$35 per attempt
Examination outline
  • Removal and Demolition Supervisor (Abatement Supervisor)
Examination sources

EPA National Lead-Based Paint Certification Examination for Abatement Supervisors

Provider
U.S. Environmental Protection Agency (EPA); for EPA certification applicants the exam is scheduled through Meazure Learning
Format
Third-party certification exam taken online or in person after applying to EPA; may be taken no more than three times within 6 months of receiving a course completion certificate
Examination outline
  • Clarification of Project Scope of Work
    • Reviewing the scope of the work
    • Contract specifications
    • HUD and EPA guidelines and rules for lead-hazard control work
    • Evaluation of lead inspection and risk assessment reports
    • Liability issues involved with abatement work
    • Types of insurance applicable to abatement
    • Roles of all participants in an abatement project
    • Record-keeping requirements for abatement projects
    • Community relations plans
    • Project budgeting
  • Initial Walkthrough
    • Locations where lead-based paint hazards may exist in residences
    • Basic building construction and architecture
    • Work area isolation and site security
    • Site storage of equipment and waste materials
    • Location of containment barriers and shower
    • Collection of pre-abatement (baseline) soil and dust samples
  • Assemble Materials and Documents
    • OSHA Lead in Construction Standard – PEL, AL
    • Definition of OSHA "competent person"
    • Worker licenses and certification
    • Acceptable baseline worker blood-lead levels
    • OSHA Hazard Communication and Respiratory Protection standards
    • OSHA Construction Standards (29CFR1926)
    • Site-specific health and safety programs
    • Requirements for worker training
    • Selection, fit and care of respirators
    • Worker health and safety needs (other than respirators)
    • Equipment and supplies used in lead hazard control work
    • Materials used for enclosure and encapsulation
  • Abatement Site Preparation
    • Crew orientation
    • How workers prevent taking lead dust home
    • Shutting down and sealing HVAC systems
    • Set up of shower, containment and critical barriers
    • Required work area signs and waste labels
    • Recommended and restricted methods for lead hazard control
    • Limitations of control methods
  • Lead Hazard Control Work
    • Potential health hazards from substances other than lead
    • Health effects of lead on workers
    • Proper use of personal protective clothing and equipment
    • Material safety data sheets (MSDSs)
    • Routine safety and health meetings
    • Containment security and ventilation
    • Air-sampling pump calibration
    • Air sampling collection procedures and strategies
    • Reviewing air-sampling results and calculating TWAs
    • Frequency and limits of medical monitoring of workers
    • Daily cleanup activities in abatement areas
    • RCRA waste disposal regulations for abatement projects
  • Final Cleanup and Clearance
    • Definition of "clean" for final clearance
    • Proper order and procedures for final cleanup
    • Surface-sealing application techniques
    • Third-party visual inspection and wipe sampling for clearance
    • Elements of the abatement report
  • General Supervisory and Leadership Skills
    • Worker motivation
    • Project management
Examination sources