OpenExamsFREE PRACTICE — ANY EXAM

Minnesota Behavior Analyst — Requirements & Free Practice

US-MN · License preparation

216 free questions · Answer explanations · No signup required

Choose what to practice

Start with an exam below. Your examination requirements depend on your application pathway. View licensing requirements

Loading selected examination banks…

Licenses, application pathways and examination requirements

Each license and applicant pathway has its own requirements and exemptions. Choosing practice questions does not determine your eligibility.

Licensed Behavior Analyst (LBA)

Independent practice of applied behavior analysis under the Minnesota Behavior Analyst Practice Act. Section 148.9987 provides practice exemptions, not additional license forms. The Board FAQ directs applicants licensed elsewhere to the same initial requirements.

Licensing authority: Minnesota Board of Psychology · Application information

Biennial renewal with current BACB certification
BCBA Certification Examination
Alternative renewal standards
This route covers certification-based renewal. The alternative of Board-established renewal requirements is retained as a secondary unresolved-route note.
Application
Submit the completed and signed renewal application and $225 renewal fee.
Deadline
Submit the application and fee by the end of the expiration day, or the following business day when expiration falls on a Saturday, Sunday, or holiday. A timely application permits continued practice while renewal is pending.
License status
Hold an existing LBA license and renew every two years.
National certification
Show current and active BACB behavior analyst certification. The BCBA exam is the current registered examination underlying the required certification; section 148.9984 does not direct routine renewal applicants to retake it.
Initial licensure with current BACB certification
BCBA Certification Examination
Applicants licensed elsewhere
The Board FAQ directs these applicants to the same section 148.9983 requirements; another jurisdiction license alone does not replace these requirements.
Application
Submit the Board application and pay the nonrefundable $225 application fee.
Background check
Complete the section 214.075 criminal background check and pay FBI and BCA background-study fees of $17 and $15.
Board review
Board staff review all submitted documentation; issuance follows application approval.
Discipline
The Board checklist requires no pending discipline or complaints in Minnesota or other jurisdictions; ethical concerns may require further Board review.
National certification
Hold current and active BCBA or BCBA-D certification; provide the credential number for primary-source BACB verification. The frozen current BCBA certification examination is retained as the examination underlying this certification; an already certified applicant is not directed to retake it.
Other credentials
Provide primary-source verification of any behavior analysis, psychology, or other health or educational credential held in any jurisdiction.
Late renewal with current BACB certification before termination
BCBA Certification Examination
Application
Submit the completed and signed renewal application.
Fees
Pay the $225 renewal fee plus the $100 biennial renewal late fee.
License status
Renew an overdue LBA license before termination under section 148.9985.
National certification
Show current and active BACB behavior analyst certification; the current BCBA examination is retained as its underlying certification examination, without asserting a renewal retest.
Termination
Within 30 days after renewal is due, the Board sends an overdue notice; failure to pay current and late fees within 60 days after renewal results in termination. This route does not assert post-termination restoration requirements.

BCBA Certification Examination

Provider
Behavior Analyst Certification Board (BACB); delivered by Pearson VUE in person at authorized Pearson VUE testing sites
Format
Computer-based multiple-choice examination, continuously available and offered only in English; each question has 4 possible answers and only 1 correct answer; all questions are equally weighted and the result is based on overall performance
Exam questions
185 multiple-choice questions: 175 scored and 10 unscored
Time limit
4 hours
Passing score
Pass/fail; criterion-referenced passing score established by the modified Angoff method
Exam fee
$245 certification application (BACB) plus $125 examination appointment (Pearson VUE); $140 examination retake application
Examination outline
  • A. Behaviorism and Philosophical Foundations (8 of 175 scored questions) (5%)
    • A.1. Identify the goals of behavior analysis as a science (i.e., description, prediction, control).
    • A.2. Explain the philosophical assumptions underlying the science of behavior analysis (e.g., selectionism, determinism, empiricism, parsimony, pragmatism).
    • A.3. Explain behavior from the perspective of radical behaviorism.
    • A.4. Distinguish among behaviorism, the experimental analysis of behavior, applied behavior analysis, and professional practice guided by the science of behavior analysis.
    • A.5. Identify and describe dimensions of applied behavior analysis.
  • B. Concepts and Principles (24 of 175 scored questions) (14%)
    • B.1. Identify and distinguish among behavior, response, and response class.
    • B.2. Identify and distinguish between stimulus and stimulus class.
    • B.3. Identify and distinguish between respondent and operant conditioning.
    • B.4. Identify and distinguish between positive and negative reinforcement contingencies.
    • B.5. Identify and distinguish between positive and negative punishment contingencies.
    • B.6. Identify and distinguish between automatic and socially mediated contingencies.
    • B.7. Identify and distinguish among unconditioned, conditioned, and generalized reinforcers.
    • B.8. Identify and distinguish among unconditioned, conditioned, and generalized punishers.
    • B.9. Identify and distinguish among simple schedules of reinforcement.
    • B.10. Identify and distinguish among concurrent, multiple, mixed, and chained schedules of reinforcement.
    • B.11. Identify and distinguish between operant and respondent extinction as operations and processes.
    • B.12. Identify examples of stimulus control.
    • B.13. Identify examples of stimulus discrimination.
    • B.14. Identify and distinguish between stimulus and response generalization.
    • B.15. Identify examples of response maintenance.
    • B.16. Identify examples of motivating operations.
    • B.17. Distinguish between motivating operations and stimulus control.
    • B.18. Identify and distinguish between rule-governed and contingency-shaped behavior.
    • B.19. Identify and distinguish among verbal operants.
    • B.20. Identify the role of multiple control in verbal behavior.
    • B.21. Identify examples of processes that promote emergent relations and generative performance.
    • B.22. Identify ways behavioral momentum can be used to understand response persistence.
    • B.23. Identify ways the matching law can be used to interpret response allocation.
    • B.24. Identify and distinguish between imitation and observational learning.
  • C. Measurement, Data Display, and Interpretation (21 of 175 scored questions) (12%)
    • C.1. Create operational definitions of behavior.
    • C.2. Distinguish among direct, indirect, and product measures of behavior.
    • C.3. Measure occurrence.
    • C.4. Measure temporal dimensions of behavior (e.g., duration, latency, interresponse time).
    • C.5. Distinguish between continuous and discontinuous measurement procedures.
    • C.6. Design and apply discontinuous measurement procedures (e.g., interval recording, time sampling).
    • C.7. Measure efficiency (e.g., trials to criterion, cost-benefit analysis, training duration).
    • C.8. Evaluate the validity and reliability of measurement procedures.
    • C.9. Select a measurement procedure to obtain representative data that accounts for the critical dimension of the behavior and environmental constraints.
    • C.10. Graph data to communicate relevant quantitative relations (e.g., equal-interval graphs, bar graphs, cumulative records).
    • C.11. Interpret graphed data.
    • C.12. Select a measurement procedure to obtain representative procedural integrity data that accounts for relevant dimensions (e.g., accuracy, dosage) and environmental constraints.
  • D. Experimental Design (13 of 175 scored questions) (7%)
    • D.1. Distinguish between dependent and independent variables.
    • D.2. Distinguish between internal and external validity.
    • D.3. Identify threats to internal validity (e.g., history, maturation).
    • D.4. Identify the defining features of single-case experimental designs (e.g., individuals serve as their own controls, repeated measures, prediction, verification, replication).
    • D.5. Identify the relative strengths of single-case experimental designs and group designs.
    • D.6. Critique and interpret data from single-case experimental designs.
    • D.7. Distinguish among reversal, multiple-baseline, multielement, and changing-criterion designs.
    • D.8. Identify rationales for conducting comparative, component, and parametric analyses.
    • D.9. Apply single-case experimental designs.
  • E. Ethical and Professional Issues (22 of 175 scored questions) (13%)
    • E.1. Identify and apply core principles underlying the ethics codes for BACB certificants (e.g., benefit others; treat others with compassion, dignity, and respect; behave with integrity).
    • E.2. Identify the risks to oneself, others, and the profession as a result of engaging in unethical behavior.
    • E.3. Develop and maintain competence by engaging in professional development activities (e.g., read literature, seek consultation, establish mentors).
    • E.4. Identify and comply with requirements for collecting, using, protecting, and disclosing confidential information.
    • E.5. Identify and comply with requirements for making public statements about professional activities (e.g., social media activity; misrepresentation of professional credentials, behavior analysis, and service outcomes).
    • E.6. Identify the conditions under which services or supervision should be discontinued and apply steps that should be taken when transitioning clients and supervisees to another professional.
    • E.7. Identify types of and risks associated with multiple relationships, and how to mitigate those risks when they are unavoidable.
    • E.8. Identify and apply interpersonal and other skills (e.g., accepting feedback, listening actively, seeking input, collaborating) to establish and maintain professional relationships.
    • E.9. Engage in cultural humility in service delivery and professional relationships.
    • E.10. Apply culturally responsive and inclusive service and supervision activities.
    • E.11. Identify personal biases and how they might interfere with professional activity.
    • E.12. Identify and apply the legal, regulatory, and practice requirements (e.g., licensure, jurisprudence, funding, certification) relevant to the delivery of behavior-analytic services.
  • F. Behavior Assessment (23 of 175 scored questions) (13%)
    • F.1. Identify relevant sources of information in records (e.g., educational, medical, historical) at the outset of the case.
    • F.2. Identify and integrate relevant cultural variables in the assessment process.
    • F.3. Design and evaluate assessments of relevant skill strengths and areas of need.
    • F.4. Design and evaluate preference assessments.
    • F.5. Design and evaluate descriptive assessments.
    • F.6. Design and evaluate functional analyses.
    • F.7. Interpret assessment data to determine the need for behavior-analytic services and/or referral to others.
    • F.8. Interpret assessment data to identify and prioritize socially significant, client-informed, and culturally responsive behavior-change procedures and goals.
  • G. Behavior-Change Procedures (25 of 175 scored questions) (14%)
    • G.1. Design and evaluate positive and negative reinforcement procedures.
    • G.2. Design and evaluate differential reinforcement (e.g., DRA, DRO, DRL, DRH) procedures with and without extinction.
    • G.3. Design and evaluate time-based reinforcement (e.g., fixed-time) schedules.
    • G.4. Identify procedures to establish and use conditioned reinforcers (e.g., token economies).
    • G.5. Incorporate motivating operations and discriminative stimuli into behavior-change procedures.
    • G.6. Design and evaluate procedures to produce simple and conditional discriminations.
    • G.7. Select and evaluate stimulus and response prompting procedures (e.g., errorless, most-to-least, least-to-most).
    • G.8. Design and implement procedures to fade stimulus and response prompts (e.g., prompt delay, stimulus fading).
    • G.9. Design and evaluate modeling procedures.
    • G.10. Design and evaluate instructions and rules.
    • G.11. Shape dimensions of behavior.
    • G.12. Select and implement chaining procedures.
    • G.13. Design and evaluate trial-based and free-operant procedures.
    • G.14. Design and evaluate group contingencies.
    • G.15. Design and evaluate procedures to promote stimulus and response generalization.
    • G.16. Design and evaluate procedures to maintain desired behavior change following intervention (e.g., schedule thinning, transferring to naturally occurring reinforcers).
    • G.17. Design and evaluate positive and negative punishment (e.g., time-out, response cost, overcorrection).
    • G.18. Evaluate emotional and elicited effects of behavior-change procedures.
    • G.19. Design and evaluate procedures to promote emergent relations and generative performance.
  • H. Selecting and Implementing Interventions (20 of 175 scored questions) (11%)
    • H.1. Develop intervention goals in observable and measurable terms.
    • H.2. Identify and recommend interventions based on assessment results, scientific evidence, client preferences, and contextual fit (e.g., expertise required for implementation, cultural variables, environmental resources).
    • H.3. Select socially valid alternative behavior to be established or increased when a target behavior is to be decreased.
    • H.4. Plan for and attempt to mitigate possible unwanted effects when using reinforcement, extinction, and punishment procedures.
    • H.5. Plan for and attempt to mitigate possible relapse of the target behavior.
    • H.6. Make data-based decisions about procedural integrity.
    • H.7. Make data-based decisions about the effectiveness of the intervention and the need for modification.
    • H.8. Collaborate with others to support and enhance client services.
  • I. Personnel Supervision and Management (19 of 175 scored questions) (11%)
    • I.1. Identify the benefits of using behavior-analytic supervision (e.g., improved client outcomes, improved staff performance and retention).
    • I.2. Identify and apply strategies for establishing effective supervisory relationships (e.g., executing supervisor-supervisee contracts, establishing clear expectations, giving and accepting feedback).
    • I.3. Identify and implement methods that promote equity in supervision practices.
    • I.4. Select supervision goals based on an assessment of the supervisee’s skills, cultural variables, and the environment.
    • I.5. Identify and apply empirically validated and culturally responsive performance management procedures (e.g., modeling, practice, feedback, reinforcement, task clarification, manipulation of response effort).
    • I.6. Apply a function-based approach (e.g., performance diagnostics) to assess and improve supervisee behavior.
    • I.7. Make data-based decisions about the efficacy of supervisory practices.
Examination sources