ASE H6 Transit Bus Electrical/Electronic Systems Certification — Requirements & Free Practice
US · License preparation
100 free questions · Answer explanations · No signup required
Choose what to practice
Start with an exam below. Your examination requirements depend on your application pathway. View licensing requirements
Loading selected examination banks…
Licenses, application pathways and examination requirements
Each license and applicant pathway has its own requirements and exemptions. Choosing practice questions does not determine your eligibility.
ASE H6 Transit Bus Electrical/Electronic Systems Certification
Individual ASE transit-bus electrical/electronic specialty certification based on passing H6 and satisfying the approved relevant work-experience requirement.
Licensing authority: National Institute for Automotive Service Excellence
Initial by examination
- Applicant
- An individual seeking first professional certification in the H6 Transit Bus Electrical/Electronic Systems specialty, not Master Transit Bus status, recertification or a student credential.
- Experience
- Two years full-time (or part-time equivalent) as a Repair Technician, with relevant hands-on maintenance, service and/or repair of light-duty or heavy-duty motor vehicles, documented to ASE. Taking and passing H6 before experience approval yields a score report but no certification until the experience requirement is met.
- Instructor Alternative
- Four academic years full-time (or part-time equivalent) teaching, not as an assistant, in a high-school or post-secondary Auto, M/H Truck or Collision-Refinish program plus at least 20 hours of technical update training in the last 12 months meets the corresponding two-year Repair Technician requirement. This teaching method cannot be combined with traditional hands-on experience or Formal Education substitutions. A principal/dean letter and technical update training records are required.
- Other Experience Evidence
- Current I-CAR Platinum status satisfies the corresponding Repair Technician two-year requirement with the current certificate; qualifying military experience is documented with DD Form 2586 (VMET), DD Form 214 or JST; a valid Canadian provincial automotive trade certificate satisfies the one-year and two-year Repair Technician requirements with a current provincial license. Self-employment credit requires owner/operator work diagnosing and repairing in a licensed repair shop and a current business license; home-garage repairs do not qualify. ASE retains discretion to evaluate substitution and other experience requests.
- Prerequisite Scope
- The H6 initial certification specialty requires the H6 test and relevant experience; the separate Master Transit Bus multi-test combination is excluded. The three-year experience row and advanced-test reference documents for L3/L4 concern those distinct advanced credentials, not additional requirements of H6. No unrelated advanced examination is added to this route.
- Scheduling
- Register and pay through myASE, then schedule and complete the initial H6 computer test at a test center within 90 days of purchase. Testing is available year-round; current fall registration is October 10–December 31, 2026. Initial H6 is not the remote recertification option. Bring the admission ticket and valid original identification under the published test-center policies.
- Training Substitutions
- For the two-year Repair Technician requirement: completing any ASE-accredited Auto, M/H Truck or Collision-Refinish program gives one year credit; completing an ASE-accredited OEM-sponsored co-op program gives two years credit; passing three or more different ASE Entry-Level Certification Program tests gives one year credit; other training gives one month credit per two months full-time training or 200 program hours, capped at one year. These substitutes cannot be combined. Categories 1 and 2 require full program completion and accreditation at completion; co-op hands-on participation is required. Attach completion certificates, Entry-Level test certificates, or an official transcript showing completed hours/weeks and completion date as applicable. These are experience substitutions, not additional H6 examination leaves.
- Validity
- Individual credentials are renewed every five years; recertification is outside this initial pathway. No official inception or retirement date for the credential, route or current H6 version is published in the adopted materials, so date boundaries remain null. The specific linked work-experience instructions govern substitution detail; the general Need-to-Know guide is used for delivery and question format, not its broad training-credit summary.
ASE H6 Transit Bus Electrical/Electronic Systems Test
- Provider
- ASE; test delivery at Prometric test centers
- Format
- English, computer-delivered multiple-choice knowledge test; one correct answer per question; English-to-Spanish glossary available
- Exam questions
- Total questions: 60; Scored questions: 50; Unscored questions: 10; The total includes the scored and unscored questions.
- Time limit
- 90 minutes
Examination outline
General Electrical/Electronic System Diagnosis (32%)
- Verify complaints and reproduce conditions, including intermittent faults and road tests
- Check circuit continuity
- Measure applied voltages, circuit voltages and voltage drops
- Measure electrical/electronic current flow
- Interpret oscilloscope and graphing multimeter waveforms
- Measure circuit and component resistance
- Locate shorts, grounds and open circuits
- Diagnose battery drain with the master/key switch OFF
- Test circuit breakers, solid state current limiters and fuses
- Test spike suppression diodes/resistors and capacitors
- Test relays and solenoids
- Interpret electrical schematics and symbols
- Interpret ladder logic diagrams
- Interpret multiplex diagnostic LEDs
- Diagnose and repair computer communication multiplex systems and controllers
- Connect a laptop to multiplex controls and verify ladder logic inputs and outputs
- Replace and adjust switches, sensors and electronic components
- Use proper care and handling of electrical/electronic components
- Diagnose controller area network failures
Battery and Starting System Diagnosis and Repair (24%)
- Perform battery load and capacitance tests
- Determine battery state of charge from open circuit voltage
- Service batteries, cables, terminals and disconnects
- Repair battery boxes, mounts and hold downs
- Use appropriate slow or fast battery charging
- Jump-start a transit bus
- Perform starter circuit voltage drop tests
- Test and replace starter control circuit components
- Test and replace starters, relays and solenoids/switches
- Replace starters and inspect flywheel ring gear or flex plate
- Service cranking circuit battery cables and connectors
- Distinguish electrical, multiplex and mechanical causes of cranking faults and noises
Charging System Diagnosis and Repair (14%)
- Diagnose no-charge, low-charge and overcharge conditions
- Service alternator drives, pulleys, fans, filters, brackets and tensioners
- Test 12-volt and 24-volt charging output
- Perform charging circuit voltage drop tests
- Test, adjust and replace voltage regulators
- Maintain, test, repair and replace alternators
- Repair charging circuit connectors and wiring
- Check battery equalizer output, wiring and mounting
- Verify charging system circuit monitor operation
- Distinguish electrical, multiplex and mechanical charging malfunctions
Lighting Systems Diagnosis and Repair (14%)
- Diagnose headlight and daytime running light operation
- Test, aim and replace headlights
- Test and repair headlight and dimmer controls and circuits
- Test and repair parking, clearance and taillight circuits
- Test and repair dash lighting circuits
- Test and repair interior and exterior passenger lighting
- Test and repair stoplight circuits
- Diagnose turn signal and hazard light malfunctions
- Test and repair turn signal and hazard circuits
- Test and repair backup lights and warning devices
- Distinguish electrical and multiplex lighting malfunctions
Related Vehicle Systems Diagnosis and Repair (16%)
- Diagnose intermittent, high, low and absent gauge readings
- Diagnose CAN-driven gauge malfunctions
- Test and repair gauge circuit components
- Test and repair visual and audible warning device circuits
- Test, replace and calibrate electronic speedometer and odometer systems
- Test and repair horns and horn circuits
- Diagnose wiper operation, speed control and park faults
- Test and repair wiper motors and circuits
- Test and repair windshield washer motors and circuits
- Test and repair side view mirror motors, heaters and circuits
- Test and repair HVAC electrical components and circuits
- Test and replace engine cooling fan electrical controls
- Distinguish electrical, multiplex and mechanical body system faults
- Test and repair entrance door controls, solenoids and Hall effect, limit, reed and proximity switches
Examination sources
- hseries.html
Study Guides, Transit Bus Study Guide link to the acquired official PDF
- transit.pdf
page 3, Test Specification and Task List controlling statements
- transit.pdf
page 3, Task List coverage statement
- transit.pdf
page 29, H6 heading
- transit.pdf
page 29, complete Content Area table; all rows and column headers visually read in h6-page-29.png
- transit.pdf
page 29, Percentage of Test column A–E and total
- transit.pdf
page 29, Questions in Test column A–E and total
- transit.pdf
page 30, B and C task lists, read complete page
- transit.pdf
page 30, D task list, read complete page
- transit.pdf
page 31, E task list, read complete page through task 14
- transit.pdf
page 4, H6 initial certification row, full column headers and starred footnote; viewed counts-page.png
- transit.pdf
page 4, starred footnote
- needtoknow.pdf
page 3, How Do I Become Certified?, item 3
- transit.pdf
page 4, H6 certification testing time column
- needtoknow.pdf
page 4, Test Centers
- needtoknow.pdf
page 3, How Do I Become Certified?, items 1–2
- policies.html
Registration and Scheduling, 90-day policy
- experience.html
ASE Work Experience Requirements, testing before experience approval
- policies.html
Photo ID with Signature Policy, opening requirement
- needtoknow.pdf
page 3, English version and glossary policy