WSQ Perform Rigger and Signalman Tasks — Written Assessment — Information & Free Practice
100 free questions · Answer explanations · No signup required
Exam Review
About WSQ Perform Rigger and Signalman Tasks — Written Assessment
WSQ Perform Rigger and Signalman Tasks — Written Assessment · SG
Key exam facts
- Provider
- WSH Council is custodian of the course-specific Technical Notes; the notes identify WDA/SSG as developer. Training Providers administer course assessments under the WSH Council requirements.
- Format
- Invigilated written assessment; the course-specific Technical Notes permit multiple-choice questions or fill in the blanks. Practical Performance is a separate compulsory course component and is excluded from the requested knowledge bank.
- Exam questions
- Total questions: 40.
- Time limit
- 1 hour for Written Assessment. The separate Practical Performance component lasts 0.5 hour; the 17.5-hour course duration is not the written answer time.
- Passing score
- 60% for the Written Assessment. Both written and practical components must be passed to complete the course.
- Exam fee
- Provider-specific full-course fee: BS Technology lists S$230.00 (SGD) before GST. This is combined course pricing, not a written-only examination fee. LearnCollab separately lists $260.00 excluding GST for its full course; no written-only fee is stated on either retrieved page.
Topics covered
Risks related to rigger and signalman tasks
Types of cranes, components and lifting gear
Legislations relating to rigger and signalman tasks
Roles and responsibilities of the rigger and signalman in pre-lifting, lifting and post lifting operations
Safe Working Loads (SWL) and weight estimation of load
Method to determine Centre of Gravity for regular and irregular loads
Checklists for pre-lift inspection of crane, lifting gear and accessories
Types of wire rope construction, slings, end fittings & connections and wire rope clips
Voice procedures
Method of good housekeeping
Hazard control measures in rigger and signalman work site
Slinging methods
Sling angle effects
Guidelines to rigging
Precautions during slinging
Lifting plan requirements
Permit to work system
Rigging techniques
Method to prepare timber wedges or slippers
3-step lifting, 3-step lowering method and safe work procedures
Hazards related to lifting operations
Common crane accidents
Emergency response procedures for lifting incidents and emergencies
12 standard hand signals
16 standard voice signals
Good housekeeping practices
Routine post-operation checks
Reporting procedures for damage and defects
How to prepare
Work through the topics, read the explanation after each answer, and revisit the areas where you miss questions. Use the official outline and reference materials below to guide your study.
These independent practice questions are not actual exam items and do not guarantee a passing result.
Frequently asked questions
What is the exam format?
Invigilated written assessment; the course-specific Technical Notes permit multiple-choice questions or fill in the blanks. Practical Performance is a separate compulsory course component and is excluded from the requested knowledge bank.
How many questions are on the exam?
Total questions: 40.
How long is the exam?
1 hour for Written Assessment. The separate Practical Performance component lasts 0.5 hour; the 17.5-hour course duration is not the written answer time.
What is the passing score?
60% for the Written Assessment. Both written and practical components must be passed to complete the course.
How much does the exam cost?
Provider-specific full-course fee: BS Technology lists S$230.00 (SGD) before GST. This is combined course pricing, not a written-only examination fee. LearnCollab separately lists $260.00 excluding GST for its full course; no written-only fee is stated on either retrieved page.
Official sources and references
- WSH Council Technical Notes Part II: Perform Rigger and Signalman Tasks
§2.1, pp.10–11
- WSH Council Technical Notes Part II: Perform Rigger and Signalman Tasks
§3.1, p.14
- WSH Council Technical Notes Part II: Perform Rigger and Signalman Tasks
§4.3.1, p.24
- WSH Council Technical Notes Part II: Perform Rigger and Signalman Tasks
§3.3, p.17
- WSH Council Technical Notes Part II: Perform Rigger and Signalman Tasks
§4.4.1.1, p.26
- WSH Council Technical Notes Part II: Perform Rigger and Signalman Tasks
§4.4.1, p.26
- WSH Council Technical Notes Part II: Perform Rigger and Signalman Tasks
§4.3.3, p.25
Confirm current exam arrangements with the exam provider.